Names can consist of uppercase and lowercase letters, numbers, and symbols. A total number of about 1, characters can be stored for all the names on the MD. F Edit OK? The deck starts recording over the existing track. An amount of time that is roughly equal to or longer than the playback time of the track is required when recording over the track. Page Falling Asleep To Music Do the following procedure to specify the fade-in or fade-out duration for playback or recording.
For further information on connecting the timer or setting the starting and ending times, refer to the instructions that came with the timer. You can select a keyboard with either an English or Japanese keyboard layout. When you use a keyboard with a different layout, you need to assign characters to the keys.
While editing a name, you can move the cursor in jumps or scroll the name. Shortcut to the naming procedure Press [Enter] while the deck is in one of the operating modes listed below, depending on what you want to name Page Assigning Characters To Keyboard Keys Assigning characters to keyboard keys Assigning a character If your keyboard layout does not match the system settings, the display may show the wrong characters or no characters at all when you press the keys. In this case, you need to assign characters to the keys.
Page Additional Information If you have any questions or problems concerning your deck, please consult your nearest Sony dealer. Forcing the shutter open may damage the internal disc. Page Troubleshooting Should any problem persist, consult your nearest Sony dealer. The deck does not operate or operates poorly. Page Self-Diagnosis Function If the code and message alternate, find them in the following table and perform the indicated countermeasure. Should the problem persist, consult your nearest Sony dealer.
Consult your nearest Sony dealer. Page 51 Incomplete! The S. F Edit changing the recording level after recording, Fade-in, Fade-out operation was not performed properly because the deck was moved while recording was in progress or the MD is damaged or dirty. Initialize flashing The Setup Menu settings have been lost.
Or the contents recorded by the timer have disappeared over time and are not be available for saving to disc, or Programme Play could not be Space P. Hold F. For details, consult your nearest Sony dealer. US and foreign patents licensed from Dolby Laboratories. Design and specifications are subject to change Page 56 Sony Corporation Printed in Malaysia This manual is also suitable for: Mds-jet Print page 1 Print document 56 pages.
Rename the bookmark. Delete bookmark? Cancel Delete. Delete from my manuals? Sign In OR. Don't have an account? Sign up! Restore password. Upload manual. Upload from disk. Upload from URL. If the code and message alternate, find them in the following table and perform the indicated countermeasure. Should the problem persist, consult your nearest Sony dealer.
The inserted MD is record-protected. The recording was not made properly. The inserted MD is dirty with smudges, fingerprints, etc. The sporadic appearance of this message is caused by the digital signal being recorded.
This will not affect the recording. There is an error in the internal data that the deck needs in order to operate. There is a problem with the optical pickup. Displays the total recording time. Displays the total playback time.
Displays the total rotating time of the spindle motor. This is displayed in hexadecimal from 00 to FF. Displays the past ten errors. X is the history number. The younger the number, the more recent is the history 00 is the latest. Select the error history number using the lAMSL knob. Displays the past five retry addresses. Mode for erasing the error and retry address histories Procedure 1. Be sure to check the following after executing this mode. Mode for erasing the total time of recording and playback Procedure 1.
Press the. Mode for erasing the total time of op rec tm, op play tm. These histories are based on the time of replacement of the optical pickup. If the optical pick-up has been replaced, perform this procedure and erase the history. Procedure 1.
Press the lAMSL. Select the contents to be displayed or executed using the lAMSL knob. Pressing the lAMSL knob will display or execute the contents selected. Pressing the lAMSL knob another time returns to step 4.
Retry cause generated during normal recording. Other than access processing, and could not read address. Mode for erasing the total spdl rp tm time These histories are based on the time of replacement of the spindle motor.
0コメント